Re: Dual Channel Memory Mode Problem.

This topic contains 2 replies, has 2 voices, and was last updated by  arturas 3 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
Author Posts
Author Posts
July 13, 2011 at 12:48 pm #86407

arturas
Member

Hello guys. I hawe M3A770DE motherboard and its Dual Channel Memory mode. And it shows all 4GB RAMS. But now i hawe a problem i go to BIOS and it shows One Channel memory Mode and All of 4GB rams. On Dx Diag shows only 4GB RAM(2GB Usable). Any can help me with it? Sorry for bad english.I tried to change slots When i add ram on one of 4 slots computer start BEEP sound and not working. (When i add to (2-3)-2-4) its BEEP. When add to 1-2,1-3,1-4 No BEEP but shows only 2GB OF RAM.

July 13, 2011 at 12:53 pm #90114

W7NOmoronovo
Member

Have you tried updating your motherboard bios?
Additionally, most motherboards require a specific slot configuration (you mention that you’ve tried them all, so I would recommend you download your motherboard manual to confirm which slots need to be populated for proper dual-channel operation).

If you have a 2GB graphics card, (like a radeon 6850), you will need to be using a 64-bit operating system for all your memory to become usable.

July 13, 2011 at 1:00 pm #90115

arturas
Member

I hawe 1GB ATI Radeon HD 4800 Series. How to update BIOS? Can you help me with that? Thanks.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.